.svg){kind=small}
Custom production
Your shopping cart is empty.
Products
Made-to-measure blackout vertical blinds are ideal for large windows and rooms where you want to reduce light entry as much as possible. Our vertical slats are available in 89 mm and 127 mm and combine practical blackout control with a clean and elegant look.
All our vertical blind systems are supplied complete, including the rail, slats, chains and bottom weights. This gives you a full system that is ready for installation.
The rail is 4.5 cm wide and 2.5 cm high. The height you provide always refers to the full system height, including both the rail and the slats. If you install the system inside the recess or between the ceiling and the floor or windowsill, we recommend making a small height adjustment to prevent the slats from dragging. A width correction can also be made if needed. Full guidance can be found in the measuring instructions. The measurements you provide are produced exactly as given.
The rail is universal, so you can choose the control side yourself. You only need to decide which side the slats should stack to.
Always read the installation guide before starting. This helps you prepare properly and follow the right steps for a correct installation.
As an online shop, we do not know your specific installation situation. For this reason, screws and wall plugs are not included as standard. The correct fixing materials depend on the surface, the weight and the intended use of the product.
Installation_manual_Vertical_Blinds - download instruction in adobe acrobat file| Louver Width: | ||
 | ||
| Estimated size of the slat stack | CLEARANCE | blind width |
| C = mm | ||
| B = mm | ||
Measure carefully and check your dimensions in several places. The dimensions you provide are the finished dimensions that will be manufactured. We do not apply any additional deductions after your order has been placed.
Follow the measuring guide below. First select the correct blind system, then choose the preferred mounting method. On product pages, the system may be selected automatically based on the product ID in the URL.
Selected system:
Select a system in step 1 before choosing the mounting method.
Make your selection above.
Once you have selected the system and mounting method, the relevant measuring instructions and important notes will appear below.
Measure at the top, in the middle and at the bottom. Use the smallest width as your reference measurement.
Width deduction for your system:
Measure on the left, in the middle and on the right. Use the smallest height as your reference measurement.
Height deduction for your system:
Benefit: the blind fits neatly inside the window recess and creates a clean, understated finish.
Measure the width at the top and bottom. Use the largest width as your reference measurement.
Width to add: desired overlap
Add the desired overlap on both the left and right sides to the measured width.
Measure the height on the left and right. Use the largest height as your reference measurement.
Height to add: desired overlap
Add the desired overlap at both the top and bottom to the measured height.
Benefit: the window appears larger and less attractive window frames can be neatly concealed.
| System | Width deduction | Height deduction |
|---|---|---|
| Venetian blinds | ||
| 16 mm Venetian blinds | 1.5 cm | 1 cm |
| 25 or 35 mm Venetian blinds | 1.5 cm | 1.5 cm |
| 50 mm Venetian blinds | 1.5 cm | 2 cm |
| 65 mm Venetian blinds | 1.5 cm | 2.5 cm |
| Other systems | ||
| Vertical blinds | 1.5 cm | 2 cm |
| Roller blinds | 1.5 cm | 0 cm |
| Day and night blinds | 1.5 cm | 0 cm |
| Pleated blinds | 0 cm | 0 cm |
