.svg){kind=small}
Custom production
Your shopping cart is empty.
Products
Made-to-measure standard roller blinds are a practical and timeless solution for any interior. A roller blind rolls down neatly in front of the window and can be adjusted to any height, making it easy to create the right balance between light, privacy and everyday comfort.
Each made-to-measure roller blind is created by fixing a fabric to a tube. The diameter of the tube depends on the weight of the chosen roller blind fabric. At the bottom, a bottom rail keeps the blind hanging neatly and gives it a clean finish.
Most roller blind fabrics are made from polyester. This synthetic material is easy to maintain and less likely to fade than many natural fabrics. Standard operation is by chain, but an electric roller blind is also possible. For that option, you can contact customer service.
Extra fabric finishing is also possible to achieve the required width. This allows roller blinds to be produced up to a width of 3500 mm.
Always read the installation guide before starting. This helps you prepare properly and follow the right steps for a correct installation.
As an online shop, we do not know your specific installation situation. For this reason, screws and wall plugs are not included as standard. The correct fixing materials depend on the surface, the weight and the intended use of the product.
Installation_manual_Roller_Blinds - download instruction in adobe acrobat file| Estimated size of the slat stack - |
|
- blind drop |
|
CLEARANCE - |
| C = mm | ||
| B = mm | ||
Measure carefully and check your dimensions in several places. The dimensions you provide are the finished dimensions that will be manufactured. We do not apply any additional deductions after your order has been placed.
Follow the measuring guide below. First select the correct blind system, then choose the preferred mounting method. On product pages, the system may be selected automatically based on the product ID in the URL.
Selected system:
Select a system in step 1 before choosing the mounting method.
Make your selection above.
Once you have selected the system and mounting method, the relevant measuring instructions and important notes will appear below.
Measure at the top, in the middle and at the bottom. Use the smallest width as your reference measurement.
Width deduction for your system:
Measure on the left, in the middle and on the right. Use the smallest height as your reference measurement.
Height deduction for your system:
Benefit: the blind fits neatly inside the window recess and creates a clean, understated finish.
Measure the width at the top and bottom. Use the largest width as your reference measurement.
Width to add: desired overlap
Add the desired overlap on both the left and right sides to the measured width.
Measure the height on the left and right. Use the largest height as your reference measurement.
Height to add: desired overlap
Add the desired overlap at both the top and bottom to the measured height.
Benefit: the window appears larger and less attractive window frames can be neatly concealed.
| System | Width deduction | Height deduction |
|---|---|---|
| Venetian blinds | ||
| 16 mm Venetian blinds | 1.5 cm | 1 cm |
| 25 or 35 mm Venetian blinds | 1.5 cm | 1.5 cm |
| 50 mm Venetian blinds | 1.5 cm | 2 cm |
| 65 mm Venetian blinds | 1.5 cm | 2.5 cm |
| Other systems | ||
| Vertical blinds | 1.5 cm | 2 cm |
| Roller blinds | 1.5 cm | 0 cm |
| Day and night blinds | 1.5 cm | 0 cm |
| Pleated blinds | 0 cm | 0 cm |
